Last updated: November 2026.
Quick answer: Match a tree shear to your excavator's operating weight first, then to the largest stem you need to cut. As a guide, 1.8 to 6 tonne diggers suit a 200 to 220mm shear, 5 to 12 tonne machines suit a 250mm shear, 12 to 22 tonne machines suit a 300mm shear, and 12 to 30 tonne machines can run a 400mm shear or larger. Cut ratings are for softwood, so allow for less in hardwood.
A tree shear turns your excavator into a fast, low-maintenance tree felling tool. It cuts the stem with a single hydraulic blade, grips it in its jaws, and lets you swing and stack the tree wherever you want it. For Kiwi farmers, contractors and forestry crews, it's one of the most productive attachments you can put on a digger for shelterbelt removal, scrub clearing and thinning.
The catch is that a tree shear only performs well when it's matched to the machine carrying it. Too small and you'll be limited on stem size. Too big and your excavator will feel light, unstable and slow, especially on slopes or at full reach.
This guide explains how to choose the right size tree shear for your excavator, when you need a rotator, how a tree shear compares with a grapple saw or mulcher, and what your machine needs to run one. Taskpower is a Nelson-based supplier of excavator attachments, with family roots in farm machinery going back to 1964. We supply and support JAK tree shears for machines from 1.8 tonne minis to 30 tonne excavators across New Zealand.
VIEW THE FULL TREE SHEAR RANGE >>>
Tree Shear Size Chart: Which Shear Fits My Excavator?
The right tree shear for most excavators is the one whose rated excavator class covers your machine's operating weight. Use the chart below as a starting point, then talk to us about your machine, your reach and what you're cutting.
| Excavator weight | Tree shear | Max cut (softwood) | Mount |
|---|---|---|---|
| 1.8 to 6 tonne | JAK200-B | 200mm | Fixed |
| 1.8 to 6 tonne | JAK200-R | 200mm | Rotating |
| 2 to 6 tonne | JAK220C | 220mm | Fixed |
| 5 to 12 tonne | JAK250-R | 250mm | Rotating |
| 6 to 12 tonne | JAK250-B | 250mm | Fixed |
| 6 to 20 tonne | JAK300-C | 300mm | Fixed |
| 12 to 22 tonne | JAK300-B | 300mm | Fixed |
| 12 to 20 tonne (up to around 22) | JAK300-R | 300mm | Rotating |
| 12 to 30 tonne | JAK-400C | 400mm | Fixed |
| 12 to 30 tonne | TreviBenne Wood Raptor | 400 to 550mm | Range of models |
In short:
- Mini diggers (under 6 tonne): JAK200 or JAK220C, cutting up to 200 to 220mm. Ideal for lifestyle blocks, orchards, hedges and scrub.
- Midi excavators (5 to 12 tonne): JAK250 series, cutting up to 250mm. The all-rounder size for farm shelterbelts and land clearing.
- 12 to 22 tonne excavators: JAK300 series, cutting up to 300mm. Built for contractors felling larger trees and clearing at volume. The JAK300-C is a lighter, more affordable option that also suits machines from 6 tonne.
- Heavy excavators (12 to 30 tonne): JAK-400C or TreviBenne Wood Raptor, cutting from 400mm up to 550mm. For forestry, large shelterbelts and big-stem work.
We also supply the heavy-duty Fravizel HD Double Ram Tree Shear for demanding forestry applications. Ask us for its specifications.
Why Excavator Weight Matters More Than Hydraulic Flow
When sizing a tree shear, your excavator's weight and stability matter more than its hydraulic output. A tree shear needs relatively little oil to operate, but it puts a lot of load on the machine. There are three reasons for this.
- It sits beyond the bucket tip. A tree shear mounts further out than a bucket, so it acts on a longer lever. Even an excavator with a high breakout force won't necessarily handle a shear that's too big for it.
- You're carrying the tree as well as the attachment. Once the stem is cut, the shear holds it. A 300mm pine can weigh far more than the shear itself, and that load is out at the end of your boom.
- The attachment itself is heavy. The JAK300-R weighs 510kg, and its optional rotator adds another 150kg. That's 660kg on the end of the arm before you've cut anything.
Slopes, reach and machine layout all make a difference. Working at full reach or high up a tree, or on a hillside, reduces how much your machine can safely carry. A zero-swing excavator is generally less stable on hills than a conventional-tail machine of the same weight.
If your excavator sits near the bottom of a shear's rated range, or you work on steep country, consider the next size down. We always recommend going by the manufacturer's rated excavator class rather than stretching it.
Softwood vs Hardwood: Reading Cut Ratings Correctly
A tree shear's maximum cutting diameter is a softwood rating, achieved only at maximum working pressure. This is true of every tree shear on the market, not just JAK.
In practice:
- Softwoods such as radiata pine, macrocarpa and other conifers common in NZ shelterbelts will cut close to the rated diameter.
- Hardwoods such as eucalyptus (gum), oak and many natives reduce the effective cutting diameter. How much depends on the species and how dry the wood is.
- Pressure matters. If your excavator's auxiliary circuit runs below the shear's maximum working pressure, you won't reach the full rated cut.
If most of your work is in hardwood, plan on a smaller effective cut, or choose a larger shear if your excavator can carry it. Tell us the species you're cutting and we'll give you a realistic figure.
Fixed or Rotating Tree Shear: Do I Need a Rotator?
You probably don't need a rotating tree shear if your excavator already has a tilt hitch. A fixed shear on a ram tilt, helical tilt or tiltrotator gives you enough positioning for most work. If your hitch is fixed, a rotating shear is strongly recommended.
Some form of positioning matters because trees rarely grow straight up from flat ground. You need to line the blade up square to the stem, cut on a lean, and lay the tree down where you want it.
| Fixed tree shear | Rotating tree shear | |
|---|---|---|
| Best for | Excavators with a tilt hitch or tiltrotator | Excavators with a fixed hitch |
| Positioning | From your hitch | 360 degree rotation built in (worm drive) |
| Weight | Lighter | Heavier (e.g. 150kg extra on the JAK300-R) |
| Hydraulics | One supply, one return | Additional plumbing for the rotator |
| JAK models | JAK200-B, JAK220C, JAK250-B, JAK300-C, JAK300-B, JAK-400C | JAK200-R, JAK250-R, JAK300-R |
The R-series JAK shears are also modular. As well as the rotator, the JAK300-R can be fitted with a guillotine or SuperSaw cutting system for different cutting tasks.
Tree Shear vs Grapple Saw vs Mulcher: Which Is Right for the Job?
A tree shear is the best choice when you want to fell and handle whole stems with low running costs. A grapple saw suits bigger timber, and a mulcher suits scrub you want to turn into mulch on site.
| Tree shear | Grapple saw | Excavator mulcher | |
|---|---|---|---|
| What it does | Cuts, grips and places whole stems | Cuts, grips and places whole stems | Shreds vegetation into mulch where it stands |
| Cut size | Up to rated diameter (200 to 550mm in our range) | Generally larger diameters than a tree shear | Up to 120mm (flail) or 200mm (fixed tooth) on FEMAC models |
| Maintenance | Minimal: one blade and one cylinder | High: chain, bar and complex hydraulics | Moderate: hammers, teeth and bearings |
| Set-up cost | Low: simple hydraulic plumbing | High: complex hydraulics and electric-over-hydraulic controls | Depends on motor size and your excavator's flow |
| Leaves behind | Stems to stack, process or chip | Stems to stack, process or chip | Mulch on the ground |
Choose a tree shear for shelterbelts, wilding conifers, thinning and clearing where you want to remove the stems for firewood, chipping or burning. Simplicity is its biggest advantage. With a single knife and cylinder, there's very little to wear out or damage.
Choose a grapple saw if you regularly cut timber beyond the capacity of the shear your excavator can carry, and you're prepared for higher purchase, set-up and maintenance costs. If you only need saw capability now and then, the modular JAK300-R can be fitted with the SuperSaw cutting system instead.
Choose a mulcher for gorse, broom, blackberry, manuka and dense scrub. See our guide to choosing an excavator mulcher, compare excavator and skid steer mulchers, or browse the FEMAC mulcher range.
Many contractors run both a tree shear and a mulcher: the shear takes out the larger stems, and the mulcher finishes the ground.
What Does My Excavator Need to Run a Tree Shear?
Most excavators can run a JAK tree shear with a single auxiliary hydraulic circuit. Non-rotating models need just one supply line and one return line, and no case drain is required.
Before you order, check:
- Auxiliary hydraulics: one supply and one return for a fixed shear. Rotating models need extra plumbing for the rotator.
- Working pressure: the shear reaches its full rated cut only at maximum pressure. For example, the JAK300-R is rated at 3,600 to 4,350 psi with a required oil flow of 60 L/min.
- Hitch or mounting: JAK shears come with mounting options such as bolt plates. Tell us your hitch type and we'll confirm the right set-up.
- Operating weight and stability: see the size chart and weight section above.
Taskpower's team can confirm the exact requirements for your excavator make and model, and advise on any fitting work needed.
Tree Shear Accessories Worth Considering
The right add-ons can make a tree shear faster and more versatile.
- JAK Collector Unit: a finger unit that holds several cut stems at once, so you can fell a group of small trees before placing them. Fits all JAK tree shears.
- JAK Rotator Unit: rotator and manifold for R-series shears, for machines without a tilt hitch.
- JAK Felling Support Tower: helps control the direction a tree falls after the cut.
- JAK Foot / Live Heel: adds grip and control when handling stems.
- Guillotine and SuperSaw cutting systems: optional cutting heads for the modular JAK300-R.
The blade on JAK shears can also be removed, so the shear works as a wood grapple for sorting and stacking.
Common Tree Shear Jobs in New Zealand
Tree shears earn their keep on jobs where you need to remove trees quickly and keep the stems.
- Shelterbelt removal and trimming: taking out old pine and macrocarpa shelterbelts to make way for irrigation, re-fencing or new plantings. Spring and early summer are busy times for this on Canterbury and Southland farms.
- Wilding conifer control: felling and clearing wilding pines on farmland and high country.
- Land and scrub clearing: removing larger stems from overgrown blocks before mulching or cultivation.
- Forestry thinning: selective felling and handling of smaller-diameter trees.
- Laneway, roadside and boundary trimming: topping and cutting back trees along tracks, drains and fence lines, on all angles and slopes.
Once the trees are down, the rest of the job usually follows a familiar path. Log grapples stack the stems, excavator log splitters and firewood processors turn them into firewood, and a PTO wood chipper deals with the branches. On soft ground, ground protection mats keep your machine moving without damaging paddocks.
Tree Shear FAQs
What size tree shear do I need for a 5 tonne excavator?
A 5 tonne excavator suits a JAK200 (1.8 to 6 tonne, 200mm cut) or a JAK220C (2 to 6 tonne, 220mm cut). The rotating JAK250-R is rated from 5 tonne, but at the bottom of its range, so it's best for stable ground and shorter reach.
What size tree shear do I need for a 12 to 20 tonne excavator?
A 12 to 20 tonne excavator suits the JAK300 series, which cuts up to 300mm in softwood. Choose the JAK300-B or JAK300-C if you have a tilt hitch, or the JAK300-R with rotator if your hitch is fixed.
Can a tree shear cut hardwood?
Yes, but the rated cutting diameter applies to softwood. Hardwoods such as eucalyptus reduce the effective cut, depending on the species and how dry the wood is. Full capacity is only reached at maximum working pressure.
Do I need a rotator on my tree shear?
If your excavator has a tilt hitch, ram tilt, helical tilt or tiltrotator, you probably don't need a rotator. If your hitch is fixed, a rotating tree shear is strongly recommended so you can line the blade up with the stem.