TDR-15 Tri-deck Roller Mower

15.5ft Wide Finishing Mower

larger imageMove mouse over the image to magnify

TDR-15 Tri-deck Roller Finishing Mower

With a 15.5' cutting width, the TDR-15 was designed to maintain wide area mowing venues that require a superior after cut appearance quickly and efficiently. Full length rollers allow a cut as low as ½" while simultaneously rolling and striping the mowing surface; making it ideal for municipal parks, sports fields, and equestrian facilities.
The TDR-15 will provide a professional finished appearance while it smooths the mowing surface at the same time. In addition, re-growth of divots is improved through root to soil contact from the rollers. Cutting heights are quick and simple to set with the supplied tool to any height from ½" to 4".

A superior quality cut is achieved with the combination of high tip speed and Progressive's high lift blades, which stands the grass up prior to cutting and then disperses the clippings evenly over the rear rollers. Only 30 to 50 horsepower is required to operate the TDR-15.
All mower decks are free floating to follow changing contours. Decks float side to side is 40 degrees total (15 degrees down and 25 degrees up). In addition, unlike similar mowers, the TDR-15 decks float a total of 24 degrees front to back.
MADE IN CANADA by Progressive Turf

FEATURES

High Blade Tip Speed

With a high blade tip speed, Progressive's high lift blades provide superior airflow, to stand grass up to be cleanly cut and evenly discharged over the rear rollers, while minimizing clumping and accumulation.

Easy Change Height Adjustment

Infinite cutting height adjustment from ½" to 4" is easily accomplished with the on board tool. This allows the TDR-15 to transition quickly for multiple mowing height applications.

Full Length Rollers

6" diameter rollers run full length on both the front and rear of each TDR-15 mower deck. Helping to smooth the mowing surface while cutting, the rollers help promote root to turf contact, for faster divot repair and healthier turf.

Pro 'Lift N Turn'

Ability to slightly raise the decks off the ground with the PTO engaged, making turning easier on the turf as the weight of the mower is distributed between the tractor and the flotation tires. An automatic stop prevents decks from rising too far.

SPECIFICATIONS

Cutting Width	15½ft / 4.72m
Cutting Height	½" to 4" / 12.5mm to 100mm
Transport Width	84" / 2.13m
Mowing Capacity	3km/h 3.75acres per hour / 1.52Ha per hour 6.5km/h 7.5acres per hour / 3.03Ha per hour 10km/h 11.3acres per hour / 4.57Ha per hour
Blade Configuration	9 x Heat Treated Alloy Steel blades
PTO HP required	30hp to 50hp
Weight	1690kg